Hello! So I’ve been wanting to try the Sharpie on glass project I’ve seen on Pinterest. I figured Valentine’s Day would be the perfect time!
I headed over to Old Time Pottery. My original plan was the Dollar Tree, but I remembered that OTP has a huge selection of glasses.
I knew I’d be making one for my hubby, as well as a few for our friends who are regulars at our home! I figured I’d give them each their own personalized glass to use when they come over!
Thankfully, OTP had some tall 24 oz. glasses on sale for 89 cents each! Can’t beat that! I bought five, and am going back for some more today. I also got a plain white mug at the Dollar Store for my Mami!
To make your Sharpie glasses, here is what you’ll need:
- Sharpies (I’ve heard BIC permanent markers work too)
- Glass, mug, or whatever you’d like to use
- Oven (this is SUCH a cheap project!)
- Alcohol/Nail polish remover & Q-tip (for mistakes)
- Tracing/parchment paper
- X-acto blade or scissors (check out the SWEET x-acto kit my hubby bought! It came in a cute wooden case and anything! I would’ve never bought this for myself, so I was thrilled!
If you want to do a logo or clean design, the tracing paper/x-acto option is the way to go. It came out so nice this way. But if you’re doing lyrics, a quote, a Bible verse, etc., you can free-hand it. I posted photos of some like that further down.
Instructions for making your AWESOME custom Sharpie glasses:
- Google the logo you’d like to do. My hubby is a Superman guy. So I did a search in Google images. I liked the way the negative image looked, so I decided to go with that.
- Tape your tracing paper over your screen. Make sure the image is the size you want it to be on your glass.
- Trace your design.
4.Once you’ve traced your design, use your x-acto to cut out the correct parts. I found that it is easier if the parts you cut out are the ones that you will fill in with the Sharpie. I hope that makes sense. Because of the Sharpie being thick, it comes out nicer if you are filling in the empty spaces with the Sharpie, instead of tracing the outlines of the parts you want to fill in later. Comment if you need clarification!
5. Tape your design onto the glass. Use your Sharpie to trace around the lines.
6. Remove the tracing paper. If you want to use it again, be careful not to rip it!
7. Now you can fill in the areas you traced. It can sometimes be tricky filling in large areas, because the Sharpie makes lines that sometimes erase parts you’ve already filled in (you’ll see what I mean). Just play around with it until you get it the way you want!
Here is the Superman glass and the Avengers glass before I put them in the oven!
There are many reports that the Sharpie on glass starts to come off, even after putting it in the oven. The general way to do it is to put it in the oven at 350 degrees for 30 minutes.
Diyopolis did a DIY Sharpie and BIC Mug experiment, and she found that a higher temperature seems to work!
1. Put your glass on a cookie sheet. If you’re doing just one mug/glass, you can place it right on the rack. This just makes it easier to put them in and take them out.
2. Preheat your oven to 425. Diyopolis recommends putting the glass in while the oven is preheating.
3. Once the oven reaches 425, set a timer for 30 minutes.
4. After your 30 minutes are up, turn off your oven and slightly open the oven door. Leave the glass in there as the oven cools down. This gives your glass some extra bake time, and it allows everything to cool a bit before you take it out!
And here are the finished products!
The first mug is for my Mami. It says “Walk by faith, not by sight.”
The next four are for our guy friends, and then my hubby (Batman, Avengers, Korean, and Superman). The one in Korean says, “wit” for our witty friend! 🙂
And the last one is for our sister. It is also a Bible verse.
You can see close-ups of some of them below:
I hope you all like this! I’m telling you, 89 cents + a Sharpie + an oven is probably the cheapest, coolest gift you could make!
We will probably fill our friends’ cups with their favorite candy, as we surprise them with their permanent and personalized glasses for when they come over!
And I am giving my hubby his Superman glass tomorrow morning for Valentine’s Day, along with a soda I bought him that says “You’re SODA amazing.” I wrote about all my candy gifts for him here.
I can’t wait to see what they all think! Let me know if you try this project! I am going to make two more today for two other friends!